Chapter 5 Symbologies
Every symbology (barcode type) has its own unique attributes. This chapter provides programming
barcodes for configuring the scanner so that it can identify various symbologies. It is recommended
to disable those that are rarely used to increase the efficiency of the scanner.
1D Barcode Setting
ENA-8
Enable/Disable EAN-8
Enable (Default) Disable
Enable/Disable 2/5-bit Add-On code
The 2/5-digit Add-On code refers to the 2/5-digit digital barcode added after the ordinary barcode.
Enable (Default) Disable
Auto
Convert EAN-8 to EAN-13
The result is converted to EAN-13, i.e. the barcode data of EAN-8 is filled with 5 bits of 0 before
transmission.
Convert EAN-8 to EAN-13 (Default) Disable
To Next Page
Loading...
Need help?
General
