Transmit check character
UPC-A bar code data is fixed to 13 characters, and the 13th character is check bit, which is used
to check the correctness of all 13 characters.
Transmit check character (Default) Disable
Enable/Disable 2/5-bit Add-On code
The 2/5-digit Add-On code refers to the 2/5-digit digital barcode added after the ordinary barcode.
Enable (Default) Disable
Auto
Transfer system character
Transmit system character (Default)
Transmit system character and country code Disable
(“0” only for USA)
To Next Page
Loading...
Need help?
General
