HPRT N130BT - General and Trigger Settings

N130BT User Manual
40
General settings (default HID single scan mode)
Host mode (CDC, HID, BT, COM）
Operand: 0x41
USB Virtual Serial Port
USB Virtual Keyboard
BT
General Serial Port
Data
0x02
0x01
0x03
0x04
Set scanner interface mode
Trigger mode (Single scanning, scanning continuously, auto sensing)
Operand: 0x42
Button Trigger
Light continuously
Auto sensing
Data
0x00(Default)
0x01
0x02
Set the scanning mode of the scanner
Default parameters (Restore factory settings)
Operand: 0x43
Data: 0x00
Restore to default parameters of factory settings.
Decoding timeout（0.1s~9s）
Operand: 0x44
0.1s
0.2s
......
9.7s
9.8s
9.9s
Data
0x01
0x02
......
0x61
0x62
0x63(Default)
When setting barcode reading, if the barcode is not read, it will stop reading the code time.