HT QuickLAN 6055 - Technical Specifications; Connectors and Cable Specifications; General and Environmental Specifications; Accessories Included

QuickLAN 6055
EN - 9
6. TECHNICAL SPECIFICATIONS
6.1. TECHNICAL SPECIFICATIONS
6.1.1. Connectors
LAN input connectors RJ45
6.1.2. Cables which can be tested
Cable type UTP, STP, FTP, etc.
Category 3, 5, 5E, 6, 7, etc.
Length up to 200m
(1)
(1) To perform the test “SPLIT PAIR” the cable must be at least 1m long
6.2. GENERAL SPECIFICATIONS
6.2.1. Mechanical features
Dimensions 128 (L) x 67 (W) x 39 (H) mm; 5(L) x 2.6(W) x 1.5(H)in
Weight 165 g; 5.8ounces
6.2.2. Remote cable identifier mechanical features
Dimensions: 72 (L) x 20 (W) x 23 (H) mm; 2.8(L) x 0.8(W) x 0.9(H)in
Weight: 25 g; 0.9ounces
6.2.3. Power supply
Battery type 1 battery 9V MN1604 6LR61 6AM6
Battery life about 300 hours
Auto Power Off 3 minutes after last pressure on keys
6.3. ENVIRONMENT
6.3.1. Environmental conditions
Working temperature 0 ÷ 40 °C; 32 ÷ 104°F
Relative humidity <80%
Storage temperature 0 ÷ 40 °C; 32 ÷ 104°F
Storage humidity <80%
This product conforms to the prescriptions of the European directive on low voltage
2006/95/EEC (LVD) and to EMC directive 2004/108/EEC
6.4. ACCESSORIES
6.4.1. Standard accessories
The accessories contained inside the packaging are the following:
• Instrument
• Remote units #1 and #2
• Three patch cables RJ-45 to RJ-45 (Patch STP)
• Battery
• Carrying bag
• User’s manual
6.4.2. Optional accessories
REM38 remote identifiers #3 - #8 and six patches RJ-45 - RJ-45 STP
REM3 remote identifier #3 and one patch RJ-45 - RJ-45 STP
REM4 remote identifier #4 and one patch RJ-45 - RJ-45 STP
REM5 remote identifier #5 and one patch RJ-45 - RJ-45 STP
REM6 remote identifier #6 and one patch RJ-45 - RJ-45 STP
REM7 remote identifier #7 and one patch RJ-45 - RJ-45 STP
REM8 remote identifier #8 and one patch RJ-45 - RJ-45 STP