Need help?Do you have a question about the HT PVCHECK and is the answer not in the manual?
General| Brand | HT |
|---|---|
| Model | PVCHECK |
| Category | Test Equipment |
| Language | English |
Initial guidelines for using the instrument safely and correctly.
Recommendations and instructions for safe instrument operation.
Procedures to follow after completing measurements.
Definition of measurement categories and their implications.
Overview of the instrument's purpose and capabilities.
Detailed list of the instrument's measurement and testing capabilities.
Verifying the instrument's condition and package contents.
Information on power source, battery status, and life.
Details regarding the instrument's calibration guarantee.
Recommendations for storing the instrument to maintain precision.
Details of the instrument's front panel layout and buttons.
Description of the connectors on the upper part of the instrument.
Explanation of each key and its function.
Description of the graphic display and its indicators.
Information shown on the screen when the instrument powers on.
How to open the main menu screen for settings and selections.
Accessing and modifying instrument settings.
Settings for language, auto power off, contrast, and sound.
Configuring measurement units for PV module parameters.
Setting the system's date, time, and format.
Configuration of the remote unit and pyranometer.
Setting minimum irradiance thresholds for tests.
Setting the correction factor for the DC clamp.
Configuration of integration period and DC clamp FS.
Setting Pmax, temperature coefficients, NOCT, Te/Tc, and nDC limit.
Selecting temperature compensation methods for nDC calculation.
Setting the maximum RPE resistance limit.
Setting test voltage, minimum resistance, and mode.
Setting module type, string count, temperature method, and tolerances.
Setting module, string count, temperature, and tolerances for IVCK.
Enabling/disabling insulation and continuity tests within IVCK.
Parameters and ranges for PV modules in the database.
Procedure for defining and entering new PV module data.
Inputting module name and parameters using the virtual keyboard.
Steps to edit data for an existing PV module in the database.
How to remove single or all PV modules from the database.
Connecting and configuring the SOLAR-02 remote unit.
Establishing communication between PVCHECK and SOLAR-02.
Connecting the DC clamp and performing zeroing.
Starting the test, monitoring progress, and handling data transfer.
Setting up parameters for efficiency test without remote unit.
Connecting and zeroing the DC clamp for the test.
Starting the test, monitoring recording, and saving results.
Overview of the IVCK quick check function and its measurements.
Step-by-step guide for performing IVCK without irradiance.
Connecting the instrument and executing the IVCK test without irradiance.
Setting up the instrument for IVCK with irradiance measurement.
Mounting the inclinometer and reference cell for accurate measurements.
Diagrams for connecting the instrument for IVCK with SOLAR-02.
Executing the IVCK test and interpreting the results.
Procedure for zeroing average values for new calculations.
Purpose and measurement modes for insulation resistance.
Performing insulation resistance measurement in FIELD mode.
Performing insulation resistance measurement in TIMER mode.
Performing insulation resistance measurement in STRING mode.
Handling anomalous situations during insulation tests.
Purpose and requirements for continuity testing.
Procedure for calibrating measuring cables for continuity tests.
Step-by-step process for measuring continuity.
Handling anomalous situations during continuity tests.
List of common messages and their meanings.
Detailed list of error messages and their causes.
Saving efficiency test results with comments and labels.
Saving results from IVCK, ΜΩ, and LOWΩ tests.
Viewing saved PV efficiency test results on the display.
Viewing saved IVCK, ΜΩ, and LOWΩ test results.
Steps to delete last saved test or the entire memory.
Requirements for connecting the instrument to a PC via cable.
Step-by-step guide for transferring data to a computer.
Recommendations for proper use, storage, and care.
Procedure for replacing the instrument's batteries.
Method for cleaning the instrument using a dry cloth.
Information on proper disposal of the appliance and accessories.
Accuracy, ranges for DC voltage, current, power, irradiance, temp.
Accuracy and ranges for IVCK DC voltage and current.
Specifications for continuity, insulation, and test voltages.
Standards followed for instrument and measurement safety.
Display type, data storage, PC interface, and radio module specs.
Recommended operating and storage environmental conditions.
Information on accessories provided with the instrument.
Explanation of nDC calculation based on temperature compensation.
Terms and conditions of the instrument's warranty coverage.
Guidance on contacting service and returning the instrument.
To Next Page
