Security settings
Assigning a PIN to a nano SIM card
You can help to protect the nano SIM card by assigning a Personal Identification Number (PIN).
Make sure you have the default PIN provided by your mobile operator before continuing.
1.
Go to Settings, and then tap Security.
2. Tap SIM card lock.
3. Tap the Lock SIM card On/Off switch to turn it on. Enter the default PIN of the card, and
then tap OK.
4. To change the card PIN, tap Change SIM PIN.
Restoring a nano SIM card that has been locked out
If you enter the wrong PIN more times than the maximum number of attempts allowed, the card
will become “PUK-locked.”
You need a Pin Unlock Key (PUK) code to restore access to HTC 5G Hub. Contact your mobile
operator for this code.
1. When prompted, enter the PUK code, and then tap Next.
2. Enter the new PIN you want to use, and then tap Next.
3. Enter the new PIN again, and then tap OK.
Setting a screen lock
Help protect your personal information and help prevent others from using HTC 5G Hub without
your permission.
Choose to set a screen lock pattern, numeric PIN, or other means of locking your screen. You'll be
asked to unlock the screen every time HTC 5G Hub is turned on or when it’s idle for a preset period
of time.
1. Go to Settings, and then tap Security.
2. Under Device security, tap Screen lock.
65 Security settings
To Next Page
Loading...