System setup
Setting up VIVE Mars CamTrack
Here's how to set up VIVE Mars CamTrack with all the included hardware.
1. Connect Mars to your PC using an IP router.
See Connecting Mars to your PC on page 14.
2. Connect Mars to a power outlet using the included AC adapter and power cord.
3. Power on Mars.
4. Mount VIVE Tracker (3.0) to Rover.
See Mounting VIVE Tracker (3.0) to Rover on page 15.
5. Connect Rover to Mars. Rover will turn on automatically.
See Connecting Rover to Mars on page 16.
12 System setup
To Next Page
Loading...
