Hardware
SteamVR Base Station 2.0
SteamVR Base Station 2.0 uses advanced optics to determine the exact location of each VIVE
Tracker (3.0) and Rover module.
§ The base stations transmit signals to VIVE Tracker (3.0). Make sure the lines of sight between
the base stations and the VIVE Tracker (3.0) units are not obstructed.
§ The signals transmitted by the base stations may interfere with nearby infrared sensors,
including those used by infrared remote controls.
1 Status light
2 Front panel
3 Power port
4 Threaded mounting hole
§ Do not attempt to force open the base stations for any reason. Doing so could injure you or
damage the product.
§ If the front panel of a base station is cracked or damaged, stop using the base station
immediately and contact the VIVE Support team.
Visit VIVE Support to learn more about Base Station 2.0.
7 Hardware
To Next Page
Loading...
