3 4
When the plug of the adapter or wire is damaged, stop using
immediately.
Don’t change the battery unless the plug of the charger is inserted into
the socket completely.
Please ensure that the plug of the adapter is inserted into the specified
power socket.
The adapter plug may be different due to the regions. Please make
confirmation whether the specification of the adapter is consist with the
specification of electric appliances in your region. Otherwise, this may cause
overheating of the equipment, electric shock, fire, chemical leakage inside
the battery, explosion and other serious consequences.
Do not touch the electric wire with wet hands.
It is possible to cause electric shock when touching the electric wire with
wet hands. When pulling out the electric wire, hold the electric wire head
rightly to pull out the wire. Don’t pull off the electric wire directly. Otherwise,
the electric wire may be broken, causing electric shock and fire.
Forbid dip the product into water caught in rain.
If the case contact with any liquid, please wipe it dry immediately. If
water or other liquid enters the inside of the instrument, please power
off the power supply at once. Continuous use may result in product
damage.
The product temperature may increase after a long time of charging.
You may feel scorching heat when the hands touch the sensors.
Problem caused by water condensation.
Don’t bring the instrument into low temperature environment from high
tempera-ture environment in a short time or from low temperature
environment to high temperature environment. This may result in that the
inside of the instrument and appearance produce water condensation. In
such condition, the instrument should be placed into portable box or plastic
bag. Before use, make it restore to the environmental temperature and take
it out to use.
If the product has water condensation inside, please power it off
immediately.Otherwise, the instrument may be damaged. Operation is not
allowed unless the water condensation disappears.
Clean the dust on the adapter plug and the data line.
When it is exposed to dusty and dump environment for a long time, the dirt
surrounding the electric equipment will accumulate moisture. This may
cause short circuit and fire.
Please use the original adapter of the company to charge the product.
The use of non-original power supply accessories may cause equipment
overheating, electric shot, fire, and leakage of chemicals inside the battery,
explosion and other serious consequences.
Such operation may cause the product case to be damaged.
Don’t use abradant, isopropanol or solvent to clean the enclosure of
the device.
Avoid that the product is impacted (such as collision and falling, etc).
Such operation may cause the product to be damaged. Please avoid such
operation.
To Next Page
Loading...
