HTI HT-A10 - Display Description; Key Description; Initial Operation

1413
WIFI
2. Display Description
Color code: Used to mark the color corresponding to the relative temperature
from low to high in the field of version.
The central point temperature cursor: Used to indicate the central position in
the screen area. The cursor color displays white. The temperature value is
displayed top left corner of the screen.
The highest temperature cursor: Used to indicate the highest temperature
position in the screen area. It will move with the movement of the highest
temperature. The cursor displays red. The temperature value is displayed
at bottom left corner of the screen.
Color code
Current
emissivity
Battery power
The highest
temperature
cursor
Maximum value
WIFI: Search the WiFi of this product through mobile devices and access it
through IP.
Minimum value
Temperature
cursor at
central point
Time
The lowest
temperature
cursor
Temperature
range
Temperature range: The range of temperature measurement (For HT-A10
products).
Central point
temperature
The lowest temperature cursor: Used to indicate the lowest temperature
position in the screen area. It will move with the movement of the lowest
temperature. The cursor displays green. The temperature value is displayed
at the central position of the screen.
3. Key Description
Menu key/On/off key
Navigation key: Up, down, left and right
Selection key/Entry key
Initial Operation
Product boot/shutdown
Press and hold the “ /MENU” button for more than 3 seconds to
turn the Thermal Imaging on or off.
LCD screen display
After turning on the power, the screen shows the thermal imaging
status.(Time adjustment may be required when you move the camera
between environments with widely varying ambient temperatures.)