HTRONIC PLS 1000 User Manual

| 45
Professional humidity switch PLS1000
GND with protective earth) can lead to unwanted voltage potentials.
– The product is designed for direct mounting on dry and clean walls and on
DIN top hat rails (35 mm).
– When laying the cables, it is important to ensure a separation of signal cables
and interfering external cables. If electromagnetic interference is expected,
use a shielded and / or twisted cable.
– If surges can be expected, install a surge protection.
INDIVIDUAL ASSEMBLY STEPS
– Open the housing by unscrewing the screw near the cable inputs and lifting
the cover of the housing.
– Mark and drill the holes for mounting according to the holes on the back of
the base. Pay attention to the position of the mains line. When drilling, check
that there are no electrical lines in the immediate area of the mounting holes.
– Fix the housing to the wall with suffi ciently dimensioned mounting material
adapted to the material of the wall.
– Insert the cables through the cable openings in the housing (cables must be
attached to the wall).
– The PLS 1000 has various possibilities of cable feedthroughs. The possible
cable entry holes are marked as predetermined breaking points on the
housing and can be broken or drilled out accordingly with a drill.
– Only operate the device with the housing closed and secured.
DIN RAIL MOUNTING
– The device can be mounted and fastened sidewise or frontal onto a DIN rail
(35 mm. The DIN rail mounting is located on the back of the device.
– To unlock, open the screw in the area of the cable entries and lift off the
housing cover. Open the DIN rail lock with a fl at-head screwdriver and lift the
device off the DIN rail.
44 |
– The device may only be stored and used outside the reach of children.
Children are not allowed to play with the device.
– Do not leave the packing material laying around. This could become a
dangerous toy for children. Therefore, dispose of unnecessary packaging
material or store it in a place that is inaccessible to children. There is danger
of suffocation!
– The device may only be passed on to third parties together with the operating
instructions.
Please follow the following installation and usage instructions to avoid malfunctions,
damage and health problems. If the safety instructions and the instructions
for proper handling in this operating manual are deliberately or negligently
disregarded, there is a danger of damages, short circuit, fi re, explosion or electric
shock. For safety and licensing reasons (CE), the product may not be changed.
In these cases, we assume no liability for personal injury, property damage or
consequential damage. In addition, the warranty / guarantee will expire.
– Ensure the room is well ventilated.
– Take time to inform yourself suffi ciently of risks when operating several
ventilators and open fi replaces.
4. GENERAL INSTALLATION INSTRUCTIONS
FOLLOW THE FOLLOWING ADVICE WHEN CONNECTING AND
INSTALLING THE DEVICE:
Before starting installation or before working on the device, the device must
be disconnected from the power supply (230 V/50 Hz) and secured against
switching it on.
– Check that the device is free of all charges before starting to assemble or
work on it.
– Use only parts that are included with the product or are defi nitely described
as accessories!
– When controlling a load that can cause a hazard to people in the event of a
fault, additional safety measures are required.
–
Carefully plan the wiring when connecting to other devices (eg PC). Under
certain circumstances, internal connections to third-party devices (eg connection
Safety instructions

HTRONIC PLS 1000 Specifications

General

Brand	HTRONIC
Model	PLS 1000
Category	Switch
Language	English