Huawei 9000 - Page 10

To Next Page

To Previous Page

Parameter Description

Protocol Specifies the protocol used to connect the touch panel to the terminal. The

default value is HTTPS.

Hypertext Transfer Protocol Secure (HTTPS) helps to keep data transmissions

secure. Before selecting this protocol, enable SSL encryption on the terminal.

NOTE

To enable SSL encryption on the terminal, perform either of the following:

l From the web interface, choose System Settings > Security and Service >

Others and set SSL encryption to Enable.

l From the user interface controlled by the remote control, choose Settings >

Security > Web Login and select SSL encryption.

User name

Password

In these fields, enter the values of User name and User name password

predefined on the terminal's web interface. The default values are api.

NOTE

After connecting the touch panel to the terminal, change the touch panel's user name

and password as soon as possible to increase security. To change the touch panel's user

name and password, log in to the terminal's web interface and choose System

Settings > Personal > Settings of API User.

This method also applies when you forget the touch panel's user name or password.

Step 4 Tap Save to save the parameter settings.

----End

Follow-up Procedure

Once connected successfully to the terminal, the touch panel displays the Huawei telepresence

home screen, as shown in Figure 2-2. For future connections, you do not need to set connection

parameters. Drag Start to the wake button

,and the Huawei telepresence home screen will

be displayed.

HUAWEI 9000 HD Video Terminal Touch Panel

User Guide 2 Using the Touch Panel

Issue 01 (2012-04-30) Huawei Proprietary and Confidential