Huawei 9000 - 4 Controlling What You See; Selecting Video Sources; Selecting and Controlling a Camera

To Next Page

To Previous Page

4 Controlling What You See

4.1 Selecting Video Sources

Use the touch panel to set the video and presentation sources for the local site.

Procedure

Step 1 Tap

in the task bar to display the main menu and tap tittle_videochoose.

Step 2 Set the input and output video sources as follows:

l From the Video Source drop-down list, select a video input as the local video source.

l From the Presentation Source drop-down list, select a video input as the presentation

source.

l From the HD Video Out 1 drop-down list, select a video output as the video feed output.

----End

4.2 Selecting and Controlling a Camera

Use the touch panel to select and control local or remote cameras.

Context

Before conferences, you can use the touch panel to control the local camera. During conferences,

you can control both local and remote cameras.

Table 4-1 describes the buttons to select and control cameras.

Table 4-1 Camera control buttons

Button Description

Selects the local camera.

HUAWEI 9000 HD Video Terminal Touch Panel

User Guide 4 Controlling What You See

Issue 01 (2012-04-30) Huawei Proprietary and Confidential