3 Logging In to the AP
About This Chapter
After an AP is powered on, you can log in to the AP using the following method:
Version Telnet server STelnet server
V200R003C00 and earlier
versions
Enable Enable
V200R005C00 and later
versions
Disable Enable
3.1 Logging In to the AP Through the Console Port
3.2 Logging In to the AP Using STelnet
3.3 Logging In to the AP Using Telnet
3.4 Logging In to the AP Using a Web Client
Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide 3 Logging In to the AP
Issue 02 (2014-12-05) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
To Next Page
Loading...
Need help?
General
