Huawei AR160 Series - 7 Installing AR2240;AR2240 C;AR3260;AR3670 Routers; Installing the Router into a Cabinet

7 Installing AR2240/AR2240C/AR3260/
AR3670 Routers
About This Chapter
7.1 Installing the Router into a Cabinet
7.2 Installing Cards
7.3 Installing a Power Module
7.4 (Optional) Installing a Cable Management Strip and a Protective Unit
7.5 Connecting the Router
7.6 Powering On and Off the Router
7.1 Installing the Router into a Cabinet
Context
NOTICE
l Leave at least 50 mm of clearance around the router for heat dissipation.
l Seen from the front panel of the router, the airflow of the router is left to right.
l If multiple routers are installed in a cabinet, it is recommended that at least 1 U of space (1
U = 44.45 mm) be kept between two routers. These routers must have the same airflow
direction; otherwise, heat dissipation is affected by hot air circulation.
Make sure the following before the installation:
l The cabinet is well fixed.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98