Huawei AR160 Series - Scenario 3: Mounting a Router on a Wall (AR1200 Series)

----End
6.3 Scenario 3: Mounting a Router on a Wall (AR1200
Series)
Context
DANGER
Before drilling holes on a wall, make sure that no power cable is routed in the wall.
Otherwise, power cables in the wall may cause personal injury.
NOTICE
l The interface side of a wall-mounted router must face down to protect interfaces from
water.
l Screws must be installed solid in the wall; otherwise, the wall-mounted router may fall
down after cables are connected.
l Ensure that there are no flammable or explosive materials near the router and no
obstructions within 100 mm around the router.
l Install the router at an appropriate height to ensure that the indicators can be observed
easily.
Tools and Accessories
l Measuring tape
l Marker
l Hammer drill
l Claw hammer
l Phillips screwdriver
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64