Huawei AR160 Series - Checking the Appearance of Contact Strips

To Next Page

To Previous Page

Table 9-11 Connections between wires and pins (using a straight-through cable as an

example)

Matching Pins of Wires Wire Color

1 White-Orange

2 Orange

3 White-Green

4 Blue

5 White-Blue

6 Green

7 White-Brown

8 Brown

Step 3 Feed the cable into the plug, and crimp the connector, as shown in Figure 9-31.

NOTE

When inserting the cable, check from the side or bore of the plug to ensure that the cable is completely

seated in the plug.

Figure 9-31 Crimping the connector

Step 4 To complete the assembly of the other end, repeat steps 1 to 3.

----End

9.2.3.3 Checking the Appearance of Contact Strips

Context

l To ensure proper contact between the crimped wires and the wire conductors, the heights

and sizes of the contact strips must be standard and the same.

Huawei

AR100&AR120&AR150&AR160&AR200&AR1200&AR

1600&AR2200&AR3200&AR3600 series Enterprise

Routers

Hardware Installation and Maintenance Guide

9 Appendix

Issue 05 (2018-07-30) Huawei Proprietary and Confidential

154

Other manuals for Huawei AR160 Series