Huawei AR160 Series - Assembling an Unshielded RJ45 Connector and Ethernet Cable

Figure 9-26 Crimping the connector
Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the
assembly of one end of the cable, as shown in Figure 9-27.
Figure 9-27 Pushing the metal shell
Step 11 To complete the assembly of the other end, repeat steps 1 to 10.
----End
9.2.3.2 Assembling an Unshielded RJ45 Connector and Ethernet Cable
Context
Figure 9-28 shows the components of an unshielded RJ45 connector and cable.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
9 Appendix
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
152