Huawei AR160 Series - Installing Cable Accessories; Precautions for Installing Cable Accessories

To Next Page

To Previous Page

NOTE

If a tester is not available, you can use a multimeter to perform a simple test, as shown in Figure 9-41.

Figure 9-41 Testing the connection of an Ethernet cable

----End

9.2.4 Installing Cable Accessories

9.2.4.1 Precautions for Installing Cable Accessories

Tools

NOTE

The illustrations in this document may differ from actual situations, but the installation methods are the

same. For example, in this document, the adapters of cable connectors have separate interfaces. In the

actual situation, the adapters may have interfaces fixed on equipment.

Use dedicated tools provided or specified by Huawei and follow the installation procedure

described here.

Bending Radius

Unless otherwise specified, bending radius (R) of cables or fibers must meet the requirements

listed in Table 9-14.

Huawei

AR100&AR120&AR150&AR160&AR200&AR1200&AR

1600&AR2200&AR3200&AR3600 series Enterprise

Routers

Hardware Installation and Maintenance Guide

9 Appendix

Issue 05 (2018-07-30) Huawei Proprietary and Confidential

160

Other manuals for Huawei AR160 Series