Huawei AR160 Series - Installing a Power Module

a
b
c
----End
7.3 Installing a Power Module
Context
Each router is configured with one power module by default. When you purchase another
power module for a router, follow the instructions in this section to install the power module.
NOTICE
l AC and DC power modules cannot be used together in the same router.
l A power module can be hot swapped.
l Vacant slots in the router must be covered with filler panels.
Tools and Accessories
l ESD wrist strap
l Phillips screwdriver
Procedure
Step 1 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 2 Loosen the captive screw on the filler panel and remove the filler panel.
Step 3 Install a power module in the router.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104