Huawei AR160 Series - Page 119

AR2200 Series
FAN
STATUS
10PWR 9PWR
11 SRU
F
A
N
12
STAT US
ON
OFF
~100-240V;50/60Hz;5A
PWR350A
ACT
micro SD
SYS ACT
LINK0 LINK1
ACT0 ACT1
EN EN
CON/AUX RST
GE1
GE0
GE1 GE2
SRU40
Console cable
COM
CON/AUX
EN
----End
Follow-up Procedure
After connecting the console cable, configure the serial port communication software on the
management PC, so that you can log in to the command line interface (CLI) of the router. The
following describes how to set the serial port communication software on the Windows XP
and Windows 7 operating systems.
l Windows XP
a. Start HyperTerminal provided by the Windows system or a third-party serial port
communication program on the management PC.
b. Create a connection, select a serial port, and configure the following parameter
settings:
n Bits per second: 9600
n Data bits: 8
n Parity: None
n Stop bit: 1
n Flow control: None
c. Click OK. The router copyright statement is displayed on the HyperTerminal. Enter
the default user account admin and password Admin@huawei as prompted to log
in to the CLI of the router.
l Windows 7
The Windows 7 operating system does not provide the HyperTerminal. You can
download free HyperTerminal software, such as PuTTY, from the Internet. The
following example describes how to use the PuTTY software.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113