1. Ensure that the floating nuts on the left and right are on the same horizontal plane. Use a
flat-head screwdriver to install four floating nuts in the marked positions on the front
mounting rails, two on left and two on right.
2. The bottom edges of the L-shaped guide rails must be in line with the bottom edges of
the marked mounting holes. Use a Phillips screwdriver to fix the L-shaped guide rails in
the marked positions with M5 screws.
Step 4 Install the router into the cabinet.
1. Move the router into the cabinet, place the router on the L-shaped guide rails, and gently
push the router into the cabinet until the mounting brackets are completely attached to
the front mounting rails.
2. Use M6 screws to fix the mounting brackets on the cabinet.
----End
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
To Next Page
Loading...
