Figure 1-1 Protective clothing
l Before carrying devices, note the following points:
– Do not carry more weight than is permitted by local laws or regulations.
– Arrange for enough personnel to carry the devices.
l Before touching a device, ensure that you are wearing ESD clothing and ESD gloves (or
wrist strap), and remove any conductive objects (such as watches and jewelry).
Figure 1-2 shows conductive objects that must be removed before you touch a device.
Figure 1-2 Conductive objects to be removed
Figure 1-3 shows how to wear an ESD wrist strap.
1. Secure the ESD wrist strap around your wrist.
2. Fasten the strap buckle and ensure that the ESD wrist strap is touching your skin.
3. Insert the ground terminal attached to the ESD wrist strap into the jack on the grounded
rack or chassis.
CX320 Switch Module
User Guide
1 Safety Instructions
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 2
To Next Page
Loading...
Need help?
General
