EasyManua.ls Logo

Huawei CX320 - Page 82

Huawei CX320
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Next startup saved-configuration file indicates the configuration file for the next
startup. The displayed information indicates that the configuration file is in vrpcfg.zip
format.
NOTE
The configuration file must be a *.zip or *.cfg file. If the configuration file is a *.dat file, this
file cannot be synchronized to the MM910.
If the configuration file is a *.dat file, perform the following operations:
n Run the save Configuration file name command to convert the configuration file into a
*.zip or *.cfg file.
n Run the startup saved-configuration Configuration file name command to set the
configuration file used for the next startup to a *.zip or *.cfg file.
For details, see CX320 Switch Module V100R001C10 Configuration Guide.
2. Save the converged switching plane configuration file from CX320 to the MM910.
<HUAWEI> save
The command output is as follows:
Warning: The current configuration will be written to the device. Continue?
[Y/N]:Y
Now saving the current configuration to the slot 1
Info: Save the configuration successfully.
begin synchronize configuration to SMM ...
slot 1: upload configuration to SMM successfully.
<HUAWEI>
3. Check that the configuration file is synchronized to the MM910 successfully.
<HUAWEI> reboot
If the following information is displayed, the configuration file is successfully
synchronized.
slot 2:
Next startup system software: flash:/xxx.cc
Next startup saved-configuration file: flash:/vrpcfg.zip
Next startup paf file: default
Next startup patch package: NULL
begin synchronize configuration to SMM ...
slot 2: upload configuration to SMM successfully.
System will reboot! Continue? [Y/N]:
If a configuration file synchronization failure message is displayed, contact Huawei
technical support.
4. Enter N to not restart the converged switching plane.
5. Connect the Ethernet port on a PC to the MGMT network ports on the panels of the
active and standby MM910 over a local area network (LAN).
CX320 Switch Module
User Guide
4 Configuring the CX320
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 76

Related product manuals