Huawei CX600-X1-M Series - 4-Port Channelized STM-1 C POS-SFP Physical Interface Card(PIC)

Product Specifications
Table 4-33 lists the specifications of the 8-Port 100/1000Base-RJ45 Physical Interface Card
(PIC).
Table 4-33 Specifications of the 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
Feature Description
Supported protocol and
service
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
PTP
Interface type RJ45
Reliability and availability Hardware features
l Hot-swappable
NMS Enhanced command line management interfaces
SNMP and MIB
Operating environment Operating temperature: -40°C to +65°C (-40°F to 149°F)
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 5% to 95%
Storage environment Storage temperature: -40°C to +70°C (-40°F to 158°F)
Storage humidity: 0% to 95%
4.6 4-Port Channelized STM-1c POS-SFP Physical Interface
Card(PIC)
Overview
The 4-Port Channelized STM-1c POS-SFP Physical Interface Card(PIC) transmits 63-channel
E1 signals through 4-channel 155M SDH line, implements the Inverse Multiplexing for
MultiLink Point-to-Point Protocol (ML-PPP), and supports synchronous Ethernet and hot
swapping.
The 4-Port Channelized STM-1c POS-SFP Physical Interface Card(PIC)consists of the service
access module, auxiliary interface module, control drive module, clock module, and power
module.
Figure 4-6 shows the appearance of the 4-Port Channelized STM-1c POS-SFP Physical
Interface Card(PIC).
Figure 4-6 Appearance of the 4-Port Channelized STM-1c POS-SFP Physical Interface Card
(PIC)
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
4 Boards
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109