Huawei CX600-X1-M Series - E1 Interface Attributes

Attributes Description
Maximum
transmitting
power
-14.0 dBm -8.0 dBm 0 dBm 0 dBm
Receiving
sensitivity
-30.0 dBm -31.0 dBm -37.0 dBm -37.0 dBm
Overload
power
-14.0 dBm -8.0 dBm -10.0 dBm -10.0 dBm
Optical fiber
type
Multi-mode Single-mode Single-mode Single-mode
C.6 E1 Interface Attributes
Table C-11 lists E1 interface attributes.
Table C-11 E1 interface attributes
Attribute Description
Connector type Anea96
Nominal bit rate
(kbit/s)
2048
Interface
impedance
l 75-ohm with coaxial cable.
l 120-ohm with twisted-pair cable.
Interface code HDB3
Pulse waveform of
the output
interface
Compliant with ITU-T G.703
Attenuation (dB)
of the input
interface at a point
with the frequency
of 1024 kHz
0 to 6
Immunity of the
input interface
Compliant with ITU-T G.703
Input jitter
tolerance
Compliant with ITU-T G.823
Output jitter Compliant with ITU-T G.823
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
C List of Interface Attributes
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
176