EasyManua.ls Logo

Huawei ES3000 V3 - Uninstalling the Driver in Linux

Huawei ES3000 V3
209 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.1.1 Uninstalling the Driver in Linux
Operation Scenario
If you want to stop using or replace the ES3000 V3, uninstall the driver first.
Procedure
Step 1 Log in to the OS as an administrator.
Step 2 Stop or exit the programs or files that are accessing the ES3000 V3.
Step 3 Run the uninstallation command based on the OS type.
l For RHEL, CentOS, or OEL, run the rpm -e kmod-hiodriver command.
l For SLES or UVP, run the rpm -e hiodriver-kmp-kernel feature command. Example:
rpm -e hiodriver-kmp-default
l For Ubuntu or Debian, run the dpkg -r hiodriver command.
Step 4 Check whether the following message is displayed. The message indicates that the installed
NVMe driver fails to be uninstalled.
Warning: fail to uninstall the installed nvme kernel module. Please uninstall the
installed nvme kernel module manually or reboot the system.
l If yes, go to Step 7.
l If no, go to Step 5.
Step 5 Check whether the following message is displayed. The message indicates that the NVMe
driver built in the OS fails to be loaded.
Warning: fail to install the in-kernel nvme kernel module. Please install the in-
kernel nvme kernel module manually or reboot the system.
l If yes, go to Step 6.
l If no, go to Step 10.
Step 6 Check whether restarting the OS will affect services.
l If yes, go to Step 9.
l If no, restart the OS and go to Step 10.
Step 7 Check whether restarting the OS will affect services.
l If yes, go to Step 8.
l If no, restart the OS and go to Step 10.
Step 8 Run the modprobe -r nvme command to uninstall the driver. During the uninstallation, check
whether a message is displayed indicating that the driver is in use. If yes, the uninstallation
fails.
l If yes, restart the OS and go to Step 10.
l If no, go to Step 9.
Step 9 Run the modprobe nvme command to install the open-source driver. Check whether a
warning or error is displayed during the installation.
l If yes, restart the OS and go to Step 10.
l If no, go to Step 10.
ES3000 V3 NVMe PCIe SSD
User Guide
5 Maintenance and Upgrade
Issue 20 (2019-02-27) Copyright © Huawei Technologies Co., Ltd. 63

Table of Contents