Procedure
Step 1 Run the hioadm -v command to check whether the tool version is later than 3.3.7.5.
l If yes, go to Step 3.
l If no, go to Step 2.
Step 2 Run the following command to uninstall the hioadm tool:
esxcli software vib remove -n hioadm
Step 3 Install the new driver. For details, see 3.6.3 Installing the ES3000 V3 Driver in ESXi.
NOTE
Install the new driver package directly. The system will automatically replace the old driver.
----End
5.3 Uninstalling, and Upgrading the Tool Package
You can download the software package as follows: log in to Huawei Enterprise support
website http://support.huawei.com/enterprise, choose Select a Product to Get Support >
IT > Server > TaiShan > ES3000 V3, click Downloads, and download the required software
package. The software package contains host tools (including hioadm) and Huawei's NVMe
driver.
5.3.1 Uninstalling the Tool Package (Linux)
Operation Scenario
Uninstall the tool package to free up space when ES3000 V3 management is not needed.
Procedure
Step 1 Log in to the operating system (OS) as an administrator.
Step 2 Run the uninstallation command based on the OS type.
l For RHEL, CentOS, OEL, or SLES, run the rpm -e hioadm command.
l For Ubuntu or Debian, run the dpkg -r hioadm command.
----End
5.3.2 Uninstalling the Tool Package (Windows)
Operation Scenario
Uninstall the tool package to free up space when ES3000 V3 management is not needed.
Procedure
Step 1 Log in to the operating system (OS) as an administrator or administrator group member.
Step 2 Choose Start > Control Panel.
The Control Panel window is displayed.
ES3000 V3 NVMe PCIe SSD
User Guide
5 Maintenance and Upgrade
Issue 20 (2019-02-27) Copyright © Huawei Technologies Co., Ltd. 69
To Next Page