FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Copyright © Huawei Technologies Co., Ltd.
Table 3-18 Indicators on the ECC800e main control module
Module running
status indicator
The power supply is normal,
the program is being loaded,
or WiFi WPS is pairing.
The power supply is
abnormal.
Blinking
at long
intervals
The software runs properly
(the indicator blinks at 0.5
Hz, on for 1s and then off
for 1s) or the ECC800e
registers with the NetEco
successfully.
Blinking
at short
intervals
The ECC800e does not
register with the NetEco (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
A system failure alarm is
generated.
The power supply for the
system is normal.
The power supply for the
system is abnormal.