EasyManuals Logo

Huawei FusionModule500 Product Description

Huawei FusionModule500
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
A Technical Specifications (Single-Phase 220 V Power
System)
Copyright © Huawei Technologies Co., Ltd.
67
A Technical Specifications (Single-Phase
220 V Power System)
Table A-1 Key technical specifications
Item
Specifications
Number of IT cabinets
≤ 2 (including the Converged Cabinet and
network cabinet)
Number of cabinets
≤ 4
Power system
220 V/1 Ph/50 Hz & 60 Hz, 230 V/1 Ph/50
Hz & 60 Hz, 240 V/1 Ph/50 Hz
Frequency range
4070 Hz
Maximum power of a single cabinet
42 U cabinet: 7 kW
24 U cabinet: 3.5 kW
Protection level
IP20
Altitude
≤ 1000 m, derated within the altitude range
of 1000 m to 4000 m
Installation mode
Installed on a concrete floor or raised floor
Cable and pipe routing
Routed in from the top and bottom
Operating temperature
If the battery is installed in another
equipment room, temperature of the
smart module equipment room should be
in the range of C to 40°C.
If the battery is installed in the same
equipment room as the smart module,
the room temperature should be in the
range of 18°C to 27°C.
Operating humidity
5%95% RH

Other manuals for Huawei FusionModule500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionModule500 and is the answer not in the manual?

Huawei FusionModule500 Specifications

General IconGeneral
BrandHuawei
ModelFusionModule500
CategoryStorage
LanguageEnglish

Related product manuals