Figure A-2 Installing a tray
Step 2 Place the Y-branch connectors on the tray.
Figure A-3 Placing Y-branch connectors
----End
Method 2: Using a Beam
Prepare a beam based on the base size of the solar inverter and the cabling of the
Y-branch connectors.
● Material: outdoor corrosion-resistant material
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
A Securing Y-Branch Connectors
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 104
To Next Page
Loading...
