Procedure
Step 1 Turn on the AC switch between the inverter and the grid.
If you perform Step 2 before Step 1, the inverter reports a fault about abnormal
shutdown. The inverter can start normally after the fault is automatically cleared.
Step 2 Turn the DC switches at the bottom of the inverter to ON.
----End
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
6 System Commissioning
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 52
To Next Page
Loading...
