About This Document
Purpose
This document describes the networking architecture, communication logic, and
operation and maintenance (O&M) methods of the commercial and industrial
(C&I) microgrid energy storage solution, as well as the installation, cable
connection, check and preparation before power-on, system power-on
commissioning, power-o, and power-on operations.
The safety precautions, product introduction, site selection requirements, and
maintenance information of the devices involved in the solution are described in
the user manuals or maintenance manuals of the corresponding devices. For
details, see A Reference Documents.
Intended Audience
This document is intended for:
● Technical support engineers
● Hardware installation engineers
● Commissioning engineers
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol
Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Commercial and Industrial Microgrid Energy Storage
Solution
Quick Guide (With Third-Party Microgrid Central
Controller) About This Document
Issue 04 (2023-12-18) Copyright © Huawei Digital Power Technologies Co., Ltd. ii
To Next Page
Loading...
