Huawei NE40E-X2 User Manual

Table 3-16 Interface attributes of the 8-Port 100Base-X-SFP Flexible Interface Card (FIC,
Supporting 1588v2)
Attribute Value
Connector type SFP LC optical interface
Interface attributes Determined by the selected SFP optical module
Working mode Full-duplex
Compliant
standard
IEEE 802.3-2002
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Network protocol IP
Table 3-17 Attributes of the 100 M SFP optical module
Attribute Value
Maximum
transmission
distance
2 km ( 1.24
mi. )
15 km ( 9.32
mi. )
40 km ( 24.86
mi. )
80 km ( 49.71
mi. )
Center wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Minimum output
power
-19.0 dBm -15.0 dBm -5.0 dBm -5.0 dBm
Maximum output
power
-14.0 dBm -8.0 dBm 0 dBm 0 dBm
Receiver sensitivity -30.0 dBm -31.0 dBm -37.0 dBm -37.0 dBm
Overload optical
power
-14.0 dBm -8.0 dBm -10.0 dBm -10.0 dBm
Optical fiber type Multimode Single-mode Single-mode Single-mode
Specifications
Table 3-18 lists the technical specifications of the 8-Port 100Base-X-SFP Flexible Interface
Card (FIC, Supporting 1588v2).
Table 3-18 Specifications of the 8-Port 100Base-X-SFP Flexible Interface Card (FIC,
Supporting 1588v2)
Parameters
Value
Silkscreen
print
8xFE-SFP-A
HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description 3 Boards
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54

Huawei NE40E-X2 Specifications

General

Brand	Huawei
Model	NE40E-X2
Category	Wireless Router
Language	English