Need help?Do you have a question about the Huawei NE40E-X2 and is the answer not in the manual?
General| Brand | Huawei |
|---|---|
| Model | NE40E-X2 |
| Category | Wireless Router |
| Language | English |
General introduction to the NE40E-X1, its capabilities, and applications.
Details the architecture, diagrams, and DC power specifications of the NE40E-X1.
Describes the system's air channel, fan modules, and heat dissipation mechanisms.
Explains the data plane architecture and the NPUI-20 unit for data processing.
Details the control plane implementation, MPU functions, and MPUG panel.
Covers chassis and board specifications, including dimensions and installation.
Introduces the NE40E-X2, its features, and hardware overview.
Describes the NE40E-X2 power supply architecture and DC power.
Explains the heat dissipation system, air channel, and fan modules for NE40E-X2.
Details the NE40E-X2 data plane architecture and NPUI-20.
Covers the NE40E-X2 control plane and MPU functions.
Outlines NE40E-X2 chassis and board specifications.
Describes the overview, panel, and interface attributes of the 8-port HIC.
Details overview, panel, and interface attributes of HIC supporting 1588v2.
Covers overview, panel, and interface attributes of the 8-port FIC with 1588v2.
Describes overview, panel, and interface attributes of the 8-port RJ45 FIC with 1588v2.
Details overview, panel, and interface attributes of the 16-port E1 (75 ohm) FIC.
Covers overview, panel, and interface attributes of the 16-port E1 (120 ohm) FIC.
Describes overview and interface attributes of the auxiliary flexible interface card.
Details overview, panel, and interface attributes of the channelized POS-SFP FIC.
Describes structure and specs for 6mm^2 and 10mm^2 DC power cables.
Details structure and technical specifications for grounding cables.
Covers structure, pin assignments, and technical specifications for console cables.
Describes structure, pin assignments, and technical specs for auxiliary port cables.
Details structure and technical specifications for clock cables.
Explains types, structure, and technical specifications of Ethernet cables.
Describes types of optical fibers, connectors, and technical specifications.
Details structure and technical specifications for 16xE1 cables.
Covers structure, pin assignments, and technical specifications for alarm cables.
Describes indicators for fan modules, PSUs, MPUs, NPUs, and flexible cards on NE40E-X1.
Details indicators for fan modules, PSUs, MPUs, NPUs, and flexible cards on NE40E-X2.
Lists basic configurations and supported physical interface cards for NE40E.
Provides power consumption and weight details for NE40E supported boards.
Details connector, working mode, cable spec, frame format, and protocol for RJ45 interfaces.
Covers connector, interface attributes, working mode, and standards for SFP interfaces.
Details connector, working mode, standards, frame format, and protocol for XFP interfaces.
Covers connector, interface attributes, working mode, and protocols for POS-SFP interfaces.
Details connector, nominal bit rate, interface impedance, and code for E1 interfaces.
Provides precautions for handling, installing, and cleaning optical modules.
Lists available 155 Mbit/s SFP/eSFP optical modules and their features.
Details available 1 Gbit/s electrical transceivers and their specifications.
Lists available 1.25 Gbit/s SFP/eSFP optical modules and their applications.
Details available 10 Gbit/s XFP optical modules and their applications.
To Next Page
