Interface Type Description
NOTE
The FE0 to FE3 interfaces, and F1 interface support auto-adaptation to a straight-through network cable
or a crossover network cable.
Figure 3-7 shows the appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-
RJ45(FIC, Supporting 1588v2).
Figure 3-7 Appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-RJ45(FIC,
Supporting 1588v2)
Panel Description
Table 3-33 describes the indicators on the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2).
Table 3-33 Description of the indicators on the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2)
Indicator
Description
STAT If the indicator is steady green, it indicates that the card works normally.
If the indicator is off, it indicates that the card is not powered on or fails
to be registered.
If the indicator is steady red, it indicates that the hardware on the card
is faulty.
If the indicator is steady yellow, it indicates that logic is not loaded to
the card.
Interface Attributes
Table 3-34 lists the interface attributes of the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2).
HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description 3 Boards
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66
To Next Page
Loading...
Need help?
General
