OptiX OSN 8800/6800/3800
Hardware Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 8800 T64 subracks can cross-connect ODU0, ODU1, ODU2, ODU2e, ODU3,
ODU4, ODUflex, VC-4, VC-3, and VC-12 granularities at the same time. Slots IU1-IU8,
IU11-IU42, and IU45-IU68 provide the same cross-connect capacity. As shown in Table 4-14.
Table 4-14 Cross-connect capacity of OptiX OSN 8800 T64 subrack
Maximum Cross-Connect
Capacity of Each Slot
a
Maximum Cross-Connect
Capacity of Subrack
a: In OptiX OSN 8800 T64 enhanced subrack, the maximum OTN service cross-connect
capacity of a single slot can be smoothly increased from 40 Gbit/s to 100 Gbit/s by
replacing the cross-connect board.
b: k=0, 1, 2, 2e, 3, 4 or flex. Only the USXH+UXCT supports ODU4 granularities.
c: Enhanced OptiX OSN 8800 T64 subracks must be configured with both the USXH and
UXCT boards, the SXH and XCT boards or the SXM and XCT boards to cross-connect
ODUk granularities.
d: General OptiX OSN 8800 T64 subracks must be configured with both the SXH and XCT
boards or the SXM and XCT boards to cross-connect ODUk granularities.
e: All service slots share a bandwidth of 80 Gbit/s.
Two functional versions are available for SXH, SXM, and XCT boards: TNK2 and TNK4.
The boards can be used in OptiX OSN 8800 T64 enhanced subrack only when they are of
the TNK4 version.