OptiX OSN 8800/6800/3800
Hardware Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
obtained when boards with the highest power consumption are installed in every slot on the
subrack.
NOTE
The NE Power Consumption Threshold (W) value specified on the U2000 must match the actual
power distribution capability.
Table 4-44 describes the power consumption of the subrack in typical configuration in an
8800 T16.
Table 4-44 Power consumption of the common units in an OptiX OSN 8800 T16
Typical
Power
Consumptio
n (W)
a
Maximum
Power
Consumptio
n (W)
a
8 x LDX, 1 x XCH, 2 x PIU, 1 x
AUX, 1 x EFI, 1 x ATE, and 1 x fan
tray assembly
4 x TN17LSC, 2 x SCC, 2 x PIU, 2 x
AUX, 1 x EFI, 1 x ATE, and 1 x fan
tray assembly
4 x TN17LTX, 2 x SCC, 2 x PIU, 2 x
AUX, 1 x EFI, 1 x ATE, and 1 x fan
tray assembly
OTU electrical
cross-connect
subrack 1
5 x NQ2, 2 x XCH, 2 x PIU, 1 x
TQX, 2 x TOA, 1 x AUX, 1 x EFI, 1
x ATE, and 1 x fan tray assembly
OTU electrical
cross-connect
subrack 2
2 x XCH, 4 x NS3, 2 x PIU, 1 x TTX,
1 x TQX, 2 x TOA, 2 x AUX, 1 x
EFI, 1 x ATE, and 1 x fan tray
assembly
OTU electrical
cross-connect
subrack 3
2 x UXCM, 4 x TN58NS4(SDFEC2),
2 x TSC, 2 x TN55TTX, 2 x AUX, 2
x PIU, 1 x EFI, 1 x ATE, and 1 x fan
tray assembly
1 x M40V, 1 x D40, 1 x OAU1, 1 x
OBU1, 6 x LDX, 1 x XCH, 2 x PIU,
1 x AUX, 1 x EFI, 1 x ATE, and 1 x
fan tray assembly
1 x M40V, 1 x D40, 1 x OAU1, 1 x
OBU1, 4 x TN17LSC, 2 x SCC, 2 x
PIU, 2 x AUX, 1 x EFI, 1 x ATE, and
1 x fan tray assembly
4 x OBU1, 4 x VA1, 1 x SC2, 2 x
FIU, 1 x XCH, 2 x PIU, 1 x AUX, 1 x