Huawei PowerCube 5000 - Page 79

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
9 Power-on and Commissioning
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
73
After the monitoring module is powered on for the first time, the preset user name is admin and the
initial password is 012589. The user name is engineer and the initial password is 000001. Change the
preset password upon your first login to ensure the system security.
Enter the Settings Wizard screen. You can set the language, date, time, system parameters, battery
parameters, and network parameters.
1. Set the language.
Table 9-1 Setting the language
Path
Parameters
Setting
Settings Wizard
English/中文/Francais
Select a language as
required.
2. Set the date and time.
Table 9-2 Setting the date and time
Path
Parameters
Setting
Settings Wizard
Date
Set to the local date.
Time Zone
Set to the local time zone.
Time
Set to the local time.
3. Set the System Param. 1.
Table 9-3 Setting the System Param. 1
Path
Parameters
Setting
Settings Wizard
Single/Parallel
Set based on site
requirements.
Parallel Quantity
NOTE
This parameter is displayed
when Single/Parallel is set to
Parallel.
1/2
Parallel ID
NOTE
This parameter is displayed
when Single/Parallel is set to
Parallel.
2
NOTE
The value of the master device
is 1 and the slave device is 2.
Battery Type
Set based on site
requirements.
NOTE
Configurable type:
TCB-A/SCB-A/DCB-A/High-