Huawei Quidway S5600 Series Installation Manual

Installation Manual
Quidway S5600 Series Ethernet Switches Chapter 1
Product Overview
Huawei Technologies Proprietary
1-1
Chapter 1 Product Overview
1.1 Introduction
Quidway S5600 Series Ethernet Switches are wire speed Layer2/3 Ethernet switches
developed independently by Huawei Technologies Co., Ltd. These intelligent and
network manageable switches are intended to be used in the network environments
that require high performance, dense port distribution, and ease of installation.
Currently, Quidway S5600 series include the following models:
z S5624P: Adopts AC/DC dual input power module (PSL130-AD). Its rear panel
provides two fixed fabric ports and one expansion module slot that is compatible
with 8-port 1000 Mbps SFP, 1-port 10 Gbps XENPAK, and 2-port 10 Gbps XFP
modules. Its front panel provides 24 x 10/100/1000Base-T auto-negotiation
Ethernet ports with RJ-45 connectors and four SFP Combo ports. Each Combo
port corresponds to an Ethernet port, so there are four port pairs; only one port in a
pair can be used at the same time. For the relationship between the Combo ports
and the Ethernet ports, refer to
Table 1-1.
z S5624P-PWR: Adopts PoE power module (PSL480-AD24P, with external AC/DC
input). Its rear panel provides two fixed fabric ports and one expansion module slot
that is compatible with 8-port 1000 Mbps SFP, 1-port 10 Gbps XENPAK, and
2-port 10 Gbps XFP modules. Its front panel provides 24 x 10/100/1000Base-T
auto-negotiation Ethernet ports with RJ-45 connectors and four SFP Combo ports.
Each Combo port corresponds to an Ethernet port, so there are four port pairs;
only one port in a pair can be used at the same time. For the relationship between
the Combo ports and the Ethernet ports, refer to
Table 1-1.
z S5624F: Adopts AC/DC dual input power module (PSL130-AD). Its rear panel
provides two fixed fabric ports and one expansion module slot that is compatible
with 8-port 1000 Mbps SFP, 1-port 10 Gbps XENPAK, and 2-port 10 Gbps XFP
modules. Its front panel provides 24 x 1000 Mbps SFP optical ports and four RJ-45
Combo ports. Each Combo port corresponds to a SFP port, so there are four port
pairs; only one port in a pair can be used at the same time. For the relationship
between the Combo ports and the Ethernet ports, refer to
Table 1-1.
z S5648P: Adopts AC/DC dual input power module (PSL180-AD). Its rear panel
provides two fixed fabric ports and one expansion module slot that is compatible
with 8-port 1000 Mbps SFP, 1-port 10 Gbps XENPAK, and 2-port 10 Gbps XFP
modules. Its front panel provides 48 x 10/100/1000Base-T auto-negotiation
Ethernet ports with RJ-45 connectors and four SFP Combo ports. Each Combo
port corresponds to an Ethernet port, so there are four port pairs; only one port in a
pair can be used at the same time. For the relationship between the Combo ports
and the Ethernet ports, refer to
Table 1-1.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English