Installation Manual
Quidway S5600 Series Ethernet Switches Chapter 1
Product Overview
Huawei Technologies Proprietary
1-19
II. Fabric ports
For fabric ports and the meanings of their LEDs, refer to Table 1-6.
III. Power input
z AC power input range
Rated voltage: 100 to 240 VAC; 50/60 Hz
Max. voltage range: 90 to 264 VAC; 50/60 Hz
z DC power input range
Rated voltage: –48 to–60 V
Max. voltage range: –36 to–72 V
z DC input of the PoE power module
The S5624P-PWR/S5648P-PWR must use the external PoE PSU recommended by
Huawei-3Com as its DC input, but not the -48VDC power supply generally available in
the equipment room. Otherwise, the device may be damaged.
Rated voltage: –53.5 V
Max. voltage range: –52 to –55 V
1.3.3 Expansion Module
The S5648P/S5648P-PWR provides one expansion module slot on the rear panel. The
expansion mode that can be used in this slot includes 8-port 1000 Mbps SFP module,
1-port 10 Gbps XENPAK module, and 2-port 10 Gbps XFP module.
I. 8-port 1000 Mbps SFP module
(1) Port status LEDs (2) SFP ports (3) Module power LED
Figure 1-10 8-port 1000 Mbps SFP module
This module provides eight 1000 Mbps SFP external optical/electrical ports.
z For an optical port, you can choose one of the following SFP modules according to
your needs.
To Next Page
Loading...
Need help?
General