Installation Manual
Quidway S5600 Series Ethernet Switches Chapter 4
Starting up the Switch at the Initial Boot
Huawei Technologies Proprietary
4-2
Figure 4-2 Setting up a new connection
Step 2: Enter the name of the new connection in the Name field and click <OK>. The
dialog box, as shown in
Figure 4-3 displays.
Step 3: Select the serial port to be used from the Connect Using dropdown menu. The
serial port must be the same port connected by the console cable.
Figure 4-3 Setting the connection port
To Next Page
Loading...
Need help?
General