03 (2011-07-15)
This is the third official release.
Compared with issue 02 (2011-06-10), this issue does not add any information.
Compared with issue 02 (2011-06-10), this issue incorporates the following change:
Topic Change Description
3.5.2 Installation Clearance for Multiple
RRUs
Optimized the clearance requirements for
multiple RRUs installed on a wall in standard
mode.
Compared with issue 02 (2011-06-10), this issue does not remove any information.
02 (2011-06-10)
This is the second official release.
Compared with issue 01 (2011-05-15), this issue does not add any information.
Compared with issue 01 (2011-05-15), this issue incorporates the following change:
Topic
Change Description
3.1 RRU Exterior Optimized the RRU exterior.
Compared with issue 01 (2011-05-15), this issue does not remove any information.
01(2011-05-15)
This is the first official release.
Compared with draft A (2011-03-15), this issue does not add any information.
Compared with draft A (2011-03-15), this issue incorporates the following changes:
Topic
Change Description
Installing an RRU RF Jumper Optimized the procedure for waterproofing
the connectors on the RRU RF jumper.
3.3 RRU Indicators Optimized the status and meanings of CPRI
indicators.
Installation Clearance Requirements of an
RRU
Added the installation clearance
requirements for an RRU equipped with
external filters.
Installing an RRU RF Jumper Added the procedure for installing an RRU
RF jumper when the RRU is equipped with
external filters.
RRU3232
Installation Guide 1 Changes in the RRU3232 Installation Guide
Issue 05 (2011-10-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
To Next Page
Loading...
Need help?
General
