Huawei SUN2000-3.8KTL-USL0 - Page 123

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
7 Operations on the Local FusionHome App
Issue 01 (2018-05-21)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
Setting the Router Connected to the SUN2000
To set the parameters for the router connected to the SUN2000, choose Comm config >
Inverter connected router settings from the Operation console screen.
Figure 7-48 Inverter connected router settings
Before the Inverter connected router settings screen is displayed, the app sends a command to start
scanning. Then the SUN2000 starts to scan nearby WiFi networks and sends the list of WiFi networks to
the app.
Table 7-14 Description of the parameters on the Inverter connected router settings screen
Parameter
Description
Value Range
To wireless router
Enables or disables
connection between the
SUN2000 and a router.

Disable

Enable
Network
Specifies the SSID of the
router to which the inverter
WiFi network connects.
N/A
Password
Specifies the WiFi password
for the router.
N/A