Huawei SUN2000-3.8KTL-USL0 - Optional) Installing an Antenna

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
5 Electrical Connections
Issue 01 (2018-05-21)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
Figure 5-19 Connecting the signal cables (SUN2000-9KTL/10KTL/11.4KTL-USL0)
----End
5.3.5 (Optional) Installing an Antenna
Prerequisites
An antenna is configured.

4G and WLAN antennas can be installed in the same way. The following describes the installation of
a 4G antenna.

Ensure that the pad for the antenna is installed correctly.
Procedure
Step 1 Remove the watertight cap from the ANT port.
Step 2 Install the pad.
Step 3 Install the antenna.