2
1. The anti-theft lock is prepared by the customer.
2. For details about how to wall-mount the device, see the SUN2000-(33KTL, 40KTL) User Manual.
1. Determine the hole positions on the support
based on rear panel dimensions.
2. Drill holes.
4. Mount the inverter on the rear panel.
6. (Optional) Install an anti-theft lock.
M12 (3 PCS)
45 N·m
3. Secure the rear panel.
5. Tighten hexagon bolts.
Unit: mm
Installing an Inverter (Support-mounting Used as an Example)
1.3
To Next Page
Loading...
