Huawei SUN2000-3KTL-M1 Quick Guide

9
Smart Dongle port (GPRS/4G/WLAN-FE)
Installing the Smart Dongle
3.6
WLAN-FE Smart Dongle (FE Communication)
You are advised to use a CAT 5E outdoor shielded network cable (outer diameter < 9 mm; internal
resistance ≤ 1.5 Ω/10 m) and shielded RJ45 connectors.
GPRS/4G/WLAN-FE
•
If FE communication is used, install a WLAN-FE Smart Dongle (SDongleA-05). The WLAN-FE
Smart Dongle is delivered with the SUN2000.
•
If 4G communication is used, install a 4G Smart Dongle (SDongleA-03). You need to
purchase the 4G Smart Dongle by yourself.
•
For details about how to operate the WLAN-FE Smart Dongle SDongleA-05, see SDongleA-05
Quick Guide (WLAN-FE) .
•
For details about how to operate the 4G Smart Dongle SDongleA-03, see SDongleA-03 Quick
Guide (4G) .
•
The quick guide is delivered with the Smart Dongle. You can download them by scanning the
QR code below.
WLAN-FE 4G

Huawei SUN2000-3KTL-M1 Specifications

General

Model	SUN2000-3KTL-M1
Type	String Inverter
Max. DC Input Voltage	600 V
MPPT Voltage Range	90 V - 560 V
Rated AC Output Power	3000 W
Max. AC Output Power	3300 W
Nominal AC Voltage	220 V / 230 V / 240 V
AC Voltage Range	180 V - 280 V
AC Output Frequency	50 Hz / 60 Hz
Max. Efficiency	98.6%
MPPT Trackers	2
DC Inputs per MPPT	1
Max. Input Current per MPPT	11 A
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Protection Degree	IP65
Max. DC Input Power	4500 W
Communication	RS485
Dimensions (W x H x D)	365 mm x 365 mm x 156 mm