Huawei SUN2000-5KTL-L1 User Manual

9 SUN2000 Disposal
9.1 Removing a SUN2000
Procedure
Step 1 Power
o the SUN2000. For details, see 8.1 System Power-O.
Step 2 Disconnect all cables from the SUN2000, including signal cables, DC input power
cables, battery cables, AC output power cables, and PE cables.
Step 3 Remove the WLAN antenna or the Smart Dongle from the SUN2000.
Step 4 Remove the SUN2000 from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing a SUN2000
● If the original packaging is available, put the SUN2000 inside it and then seal
it using adhesive tape.
● If the original packaging is unavailable, put the SUN2000 inside a suitable
hard carton and seal it properly.
9.3 Disposing a SUN2000
If the SUN2000 service life expires, dispose the SUN2000 according to the local
disposal rules for electrical equipment and electronic component waste.
SUN2000-(2KTL-6KTL)-L1
User Manual 9 SUN2000 Disposal
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 103

Huawei SUN2000-5KTL-L1 Specifications

General

Model	SUN2000-5KTL-L1
Max. Efficiency	98.4%
Rated AC Output Power	5000 W
Operating Temperature Range	-25°C to +60°C
Topology	Transformerless
Max. apparent AC power	5500 VA
Max. input voltage	600 V
Number of MPPT trackers	2
Max. short-circuit current per MPPT	15 A
Protection degree	IP65
Max. Input Power	7500 W
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Nominal AC voltage	230 V
AC voltage range	180 V - 280 V
Rated Output Voltage	230 V