Huawei SUN2000-5KTL-L1 User Manual

Table 7-5 DRM requirements
Mode Port on the SUN2000 Requirements
DRM0 DI1 and GND of the COM
port
● When switches S0 and S9 are
switched on, the solar inverter
should be turned o.
● When switch S0 is switched
o, and switch S9 is switched
on, the solar inverter should
be grid-tied.
Procedure
Step 1 On the home page, choose Settings > Feature parameters.
Step 2 Set DRM to .
Figure 7-19 DRM
----End
SUN2000-(2KTL-6KTL)-L1
User Manual 7 Man-Machine Interaction
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 87

Huawei SUN2000-5KTL-L1 Specifications

General

Model	SUN2000-5KTL-L1
Max. Efficiency	98.4%
Rated AC Output Power	5000 W
Operating Temperature Range	-25°C to +60°C
Topology	Transformerless
Max. apparent AC power	5500 VA
Max. input voltage	600 V
Number of MPPT trackers	2
Max. short-circuit current per MPPT	15 A
Protection degree	IP65
Max. Input Power	7500 W
Output Frequency	50 Hz / 60 Hz
Cooling Method	Natural Convection
Nominal AC voltage	230 V
AC voltage range	180 V - 280 V
Rated Output Voltage	230 V