Huawei UA5000 - Page 171

Procedure
Step 1 Add the EMU, with the type of fan.
huawei(config)#emu add 1 FAN 0 6 rs485 Fan
Step 2 Configure the speed adjustment mode for the fans.
huawei(config)#interface emu 1
huawei(config-if-fan-1)#fan speed mode automatic
Step 3 Configure the alarm reporting for the fans.
huawei(config-if-fan-1)#fan alarmset block permit
huawei(config-if-fan-1)#fan alarmset read-tem-fault permit
huawei(config-if-fan-1)#fan alarmset tem-high permit
huawei(config-if-fan-1)#fan alarmset fault permit
Step 4 Query the parameters of the fans.
huawei(config-if-fan-1)#display fan system parameter
EMU ID: 1
FAN configration parameter:
------------------------------------------------------------------
FAN timing mode: Auto timing
------------------------------------------------------------------
Alarm_name Permit/Forbid
Read temperature fault Permit
Fan block Permit
Temperature high Permit
Power fault Permit
-------------------------------------------------------------------
Step 5 Save the data.
huawei(config-if-fan-1)#quit
huawei(config)#save
----End
UA5000 Universal Access Unit
Environment Monitoring 9 Fan Tray Monitoring Solution
Issue 01 (2012-08-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
165